Tu Chaoyu's Working Zone

 VAG : GOLF 8 2020-2024  TALAGON 2021-2024  Tavendor 2021-2024  Lamando  2022-2024  Viloran 2022-2024  Teramont 2021-2024  AUDI A3 2020-2024  Octavia 2021-2024  ID3 2021-2024  ID4 2021-2024  ID6 2021-2024  Q2 E-TTRON 2022-2024  Q4 E-TTRON 2022-2024  Q5 E-TTRON 2022-2024  Nissan: ALTIMA ALTIMA/TEANA e-POWER SYLPHY INFINITI QX50 J55 INFINITI QX55 Sentra 2021-2024  Rogue 2021-2024 Pathfinder 2022-2024 

 With this BMW F chassis programming cable, Pad III V2.0 (98966） supports DoIP testing. DoIP Coverage:

 Tool Download Link: https://drive.google.com/file/d/174TTXHWbR4MUJ_jY26ukp_z7IjjBZDj0/view?usp=sharing

 Steps Assistant Side( Jake) Homepage> Tech2Tech> Contacts> type in the sn to be assisanted> Search > Click Remote Diagnose> Request Control Remote Device  > Wait Tom accept the request Device to be assistant Side( Tom) Homepage> Log in App > Accept the request sent by Jake, and then tech2tech starts. Jake's tool screenshot Jake-1 Jake-2 Jake-3 Jake-4 Tom's tool screenshot Tom-1 Tom-2 Tom-3

Error Status Scope Box O2-1/O2-2, connect to Launch Tablet, don't show any signal. Debugging Steps 1. Need power scope box with a 12V DC power supply. you can use a double-clamp power cable connect to the vehicle battery to power the scope box during vehicle testing. 2. Check USB management is Open or not, keep it open. 3. Connect Scopebox to tablet through a USB cable, Once hooped up, pop up a window, tick "Use by Default for the USB device", then OK. If there are no windows pops up, try another USB cable, or use a flash drive to test whether the tablet USB port is normal or not. everything is ready, Signal out.  (here we use scope box test signal as input)

 Error Info Figure-1 Solution 1. Connect Smartlink C to the internet, and upgrade its system and firmware to the latest version. Figure-2 Figure-3 Figure-4 you may need to enter WLAN connect to Wifi 1stly or connect with the ethernet cable. 2. Check already installed the latest version driver,  Currently, by 2023/10/23, the latest version is V2.1. You can download from https://www.launchtechusa.com/downloads Or refer to this video: https://www.youtube.com/watch?v=hcb9S6L0XDc Figure-5 3. Connect the vehicle to Smartlink C with a USB cable, and it show Connected on the Smartlink C PC driver page(Figure-5), and on Smartlink C, it will show Figure-6. Figure-6 USB mode, The vehicle is communicating. If not, please check the connection, change another USB cable, turn on the ignition, or do other operations to make it work. 4. Make sure you already select Launch Smartlink as the GDS2 tech driver. >Launch Techline program> Standalone mode > Connect to vehicle > Select...

 Steps >Setting>System>About Device>Click 5 times "Build number" >Setting>System>Developer Options>Turn on "USB debugging" >Open Calculator> input "!^!^3646633^!^!" >Slide left 4 times >Select MTKLogger >Click the bottom red triangle button to start log collection > Start repeating the bug and then switch back to log collection software, click the bottom square to stop log collection. >Home page>ES File Explorer >Find "mtklog" folder and then copy this folder to a flash drive and send it to the engineer.