X-931 Calibration by compenstation

1. find a good condition car, and measure its tire data with X-931 and a 3rd paty aligner.
data by 3rd party
data by X-931
write down these 2 group of data, and open X-931 software folder, find file "Cameraindex.txt", find line 10 and its 1st 8 data.
replace intial value with new value in cameraindex.txt and save, then test with x-931 and we get new data, nearly same as 3rd party
https://docs.google.com/spreadsheets/d/1la5tVqoxGTDY-eXotdeDi6R9-0IjsTXe/edit?usp=sharing&ouid=115668802095496237234&rtpof=true&sd=true

Comments

Post a Comment

Popular posts from this blog

#Smartlink J2534# Launch J2534 Driver can’t work normally with GM Techline Connect Debugging

Image
 Error Info Figure-1 Solution 1. Connect Smartlink C to the internet, and upgrade its system and firmware to the latest version. Figure-2 Figure-3 Figure-4 you may need to enter WLAN connect to Wifi 1stly or connect with the ethernet cable. 2. Check already installed the latest version driver,  Currently, by 2023/10/23, the latest version is V2.1. You can download from https://www.launchtechusa.com/downloads Or refer to this video: https://www.youtube.com/watch?v=hcb9S6L0XDc Figure-5 3. Connect the vehicle to Smartlink C with a USB cable, and it show Connected on the Smartlink C PC driver page(Figure-5), and on Smartlink C, it will show Figure-6. Figure-6 USB mode, The vehicle is communicating. If not, please check the connection, change another USB cable, turn on the ignition, or do other operations to make it work. 4. Make sure you already select Launch Smartlink as the GDS2 tech driver. >Launch Techline program> Standalone mode > Connect to vehicle > Select a device type
Read more

#Tech2Tech# Device side control Device side Guide

Image
 Steps Assistant Side( Jake) Homepage> Tech2Tech> Contacts> type in the sn to be assisanted> Search > Click Remote Diagnose> Request Control Remote Device  > Wait Tom accept the request Device to be assistant Side( Tom) Homepage> Log in App > Accept the request sent by Jake, and then tech2tech starts. Jake's tool screenshot Jake-1 Jake-2 Jake-3 Jake-4 Tom's tool screenshot Tom-1 Tom-2 Tom-3
Read more